Double cast iron body. Wall thickness 2-4 mm.

Lower Part:

Sole as U-shaped iron, 93 and 58 mm long, 26 and 24 mm wide. Front angled at 40°. 21 mm long, 12 mm round cam with 5 mm thread and side walls.

Upper Part:

Cast piece, 105 mm long, 25 mm wide, and 20/38 mm high. Open at the top, side walls as beams down to the chip breaker, rounded at 6x26 mm. Behind that, a 10x7 mm slot with a 5 mm screw to connect and slide the two parts. Mouth 1 to 4 mm. Iron cap 33x16x5 mm with a 4 mm screw.

Iron: 26 mm

Cutting angle: 40°

Mark: STANLEY RULE & LEVEL CO.