Coachmaker’s plane. Side-cheek plane. Wooden body, front edge beveled, rear rounded. A 1.6 cm wide, 0.6 cm deep groove with a 25° slope runs downward for the iron and wedge. Right underside has a 0.3 cm deep shoulder, 1.6 cm high. In front of the iron a 2 mm iron plate (20×16 mm) is screwed on as a chip-breaker. The flat wooden wedge (5.9×0.5×1.6 cm) is pressed by a half-round wooden piece (3.7×1.2/1.4×2.4 cm) using two screws. Sole flat. Chip-escape on the left above the iron.

Iron: 16 mm, vertical edge, bevel on left.
Cutting angle: ∠ 7°