Tongue Plane with Iron Screws.
Lightly rounded top with line decoration. Shaving hole on the right.
Wedge: Wooden wedge. Right side has a bronze plate 88x16 mm. Tongue iron 205x45x3 mm fastened with bronze band 205x24x1 mm and screws, with 3 mm wood inset at the top.
Depth Stop: Iron 110x20 mm with bronze block 38x24x10 mm with internal thread. Bronze guide at the bottom 47x15 mm, fixed with two screws. Iron screw Ø 6 mm, 40 mm long, thread metric 60° DIN 13/14, 1.25 pitch, with rear holder and bronze oval head.
In between: Bronze plate 47x16x5 mm fixed with two screws. Depth setting from 0 to 21 mm.
Fence: Wooden L-shaped fence 21x2.1/4.7x8.6 cm with iron 197x73x3 mm reinforcement plate fastened with 7 screws. The lower part is dovetailed, and the bottom has a nicely shaped profile.
Two iron screws, each 205 mm long, with ball heads Ø 14 mm and metric thread 60° DIN 13/14, 2.0 pitch, are inserted into the body of the plane and held in place by round iron nuts embedded on both sides of the wood. Four hollow bronze nuts are used to adjust and lock the fence. Two of these nuts are outside, Ø 40 mm, and beautifully knurled. The two inner ones are embedded inside the body of the plane. Fence adjustment from 0 to 13 mm.
Iron: 4 mm
Cutting Angle: 50°
Mark: Lion on Arrow, PEUGEOT FRÈRES, ACIER FONDU